Brush Care

1. CONDITION YOUR BRUSHES

Most cleaners out there (including your run-of-the-mill dish soap) do an amazing job of STRIPPING THE LIVING DAYLIGHTS out of your brush, making it dry and brittle over time.

BB Frösch Brush Conditioning Soap cleans AND conditions your brushes in one step.

ATT BCB 2a

 

As if an awesome-smelling brush conditioning soap weren’t enough (seriously, it takes away the “wet-dog” smell you usually get when washing natural bristles), it comes in a plastic jar for easy cleaning and next-to-the-sink storage. AND! When the soap is gone, you just drop a refill puck in and keep re-using the jar.

ATT BCB WET DOG

Use BB Frösch Brush Conditioning Soap for paint brushes AND  wax brushes. It is even great for make-up brushes!

***NEW BRUSH ALERT***

Before you ever use a new brush, CONDITION it.

Now you don’t have to suffer the fate of new, runaway bristles getting in your paint.

Follow these steps for NEW and OLD brushes, alike.

First, wet your brush.

ATT BCB 3a

Second, swirl your brush two or three times in the jar of Brush Conditioning Soap

ATT BCB 5

Third, put the jar down, and swirl the soaped-up brush around in your palm to work up a clean-smelling lather. This is how I clean the paint off my hands and the brush at the same time. For those of you who aren’t afraid of a little too much information, I keep a puck of this soap in my shower to take care of all the areas where I “painted” myself during my project, because this soap is incredibly moisturizing on my skin, too!

ATT BCB 6

Fourth, rinse your brush, “pulling” out the suds out until no suds remain.

ATT BCB 7
Follow the previous steps until your soap suds are clear. Your brush may be “stained” from the tint of your paint, but it is clean as long as the soap suds are white and the water runs clear.

Here’s THE MOST IMPORTANT STEP for NEW brushes…

Five, beat the bristle-end of your brush on the sink edge (you may want to cover the sink edge with a towel.) This will release any loose bristles that are inevitable with new brushes. Now, you shouldn’t have any new-brush bristles in your paint project!

ATT BCB 8

Follow these same steps every time you paint, and not only will your brushes get softer over time, so will your skin!

Moving right along on your Brush Care Basics Journey…

Now that you know how to condition new and old brushes alike, here’s how you make your end-of-project-brush-cleaning even easier.

2. KEEP A JAR OF WATER HANDY
I like to use leftover salsa jars. Of course, you don’t have to go buy chips and salsa
but, why not?

Put just enough water in the jar to cover the bristles of your brush, but not the ferule. Since the ferule is where the glue is, you don’t want to give that glue any opportunity to loosen the bristles over time.

Every time you need to step away from your chalk paint project, submerge your brush, bristles-deep, in your jar of water. This will save boatloads of time when cleaning, because paint won’t have time to dry on your brush.

Last, but not least…

3. TRAIN YOUR BRUSH

Just like the sweetest of children and the most well-meaning of husbands, even fancy, expensive brushes sometimes need a little training. Lucky for you, when it comes to brushes, this is slightly easier than with the afore-mentioned loved ones.

After washing/conditioning your brush, rinsing it and beating any bristles loose, gently wrap the bristle-end of you brush in a paper towel and allow to dry. This will train any bristles that want to fan out to straighten up!

ATT BCB 9